All Gear Design
The 650 is all gear design with drive to each of the three flex heads
as well as power to the drum for the highest production rate in its
size.
Click picture to see inside planetary system. |
 |
 
Magnet Mount System |
Magnetic Instant-Change Tool System.
The Avenger 650 comes with the Magnetic Instant-change tool mounting system. All you will need to purchase is the diamond tools you will need for your particular project. The system can mount scrapper tools ,regular metal trapezoid tools, and velcro mount tools.
|
American Made Water and Dust Resistant Electronics
The Motor controller on all Avenger machines are indoor and outdoor rated
for harsh environments with water and dust protection. You get maximum cooling when it is hot
because the cooling fins are always open to the air not sealed in a
cabinet, and no entry of dust into the electronics cavity. USA MADE
|
 |
Control Head
 |
The Avenger 650 has all the features of much larger machines, such as forward and reverse directions on the grinding heads. This allows you to run directional tools such as scrapper tools to remove epoxy and glue. Most diamond tools do not have a direction so you can run those either way. The 460 also has variable speed to grind rough floors by slowing down the grinding heads to keep them from bouncing which will stop them from cutting. By speeding up the grinding heads you can polish and burnish the floor with the proper tooling. Variable speed also allows you to work on marble and granite floors.
|
Ratcheting Handle
You can instantly adjust the handle to be more comfortable, or to tip the machine over or to store the handle outr of the way.
One squeeze of the lever and move is to position.
|
 |
|
PRODUCTION RATES
|
sqf per hr m² per hr
|
|
|
|
|
|
Concrete Grind 1 step
|
800-1100
80 -110
|
|
|
Terrazzo Grind 1 step
|
300-500
30 - 50
|
|
|
Glue Removal 1 step
|
800-1000
80 - 100
|
|
|
Paint Removal 1 step
|
800-1200 80 - 120
|
|
|
Marble Polishing 5 steps
|
200-400
20 - 40
|
|
* Production numbers may vary according to surface conditions, diamonds used, equipment operator, etc.
|
 |
Vacuums
Because it is important to use a functional Hepa vacuum if you are going to grind dry, Levetec has a supply of low cost HEPA filter vacuums to do the job.
Filtration is an enormous issue when it comes to industrial vacuum cleaners. After all, if you take the time to vacuum an area, the last thing you want is the same material that you just vacuumed to be exhausted right back into the atmosphere. Depending on what you're collecting, the dust or debris may be hazardous to your product finish, or even your health. We, at Levetec, realize the importance of ultra-efficient filtration systems and put our guarantee on every industrial vacuum cleaner we sell.
|
Metal Diamond Tools
To grind floors effectively it is necessary to use metal tools to grind down through the cap and leave a substrate that is ready to coat, seal or polish. Click on the picture to see the metal diamond tooling.
|
 |
Resin Diamond Tools
To bring a floor up to a high shine it is necessary to use
Resin tools to polish the substrate to the look you seek or to coat,
seal or polish. Click on the picture to see the Resin diamond tooling.
|
 |
Contact
Levetec
